Operation Specification for Precision Hardware Processing

1. When processing products. Operators must maintain the correct posture and have sufficient energy to cope with the work. If they find that they are unwell, they must leave the job immediately for personal safety and report to the workshop supervisor or higher-level leadership. During operation, you must concentrate your thoughts, chat and cooperate with each other. Operators must not operate in a state of irritability and fatigue. For personal safety, avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a helmet.

2. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.

3. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice. In order to avoid unnecessary collision between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and reasonableness, whether the screws are firm, and whether the blank holder is reasonable Location.

4. You must wait for all other personnel to leave the working area of the machine and remove the sundries on the workbench before turning on the power to start the machine.

5. When the machine is working, it is forbidden to reach into the working area of the slider, and it is strictly forbidden to pick up and place the workpiece by hand. Standard tools must be used when picking and placing the workpiece in the die. If any abnormal sound or malfunction of the machine is found, the power switch should be turned off immediately for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board. For the safety of others, they cannot put their hands in the working area of the machine or touch the moving parts of the machine with their hands.

The above is a detailed introduction of precision hardware processing technology and operating specifications. Small hardware products made of precision hardware are not final consumer goods, but as supporting products of industrial manufacturing, there are also some semi-finished products. Only a small part of precision hardware products are tool consumer goods. For example: screws, screwdrivers, wrenches, fishing tackle, etc. Precision hardware accessories are machine parts or components made of precision hardware, or some small hardware products, which can be used alone or as auxiliary appliances.